Hi ,
I have been given BSNL WIFI modem. I have configured the modem by getting the relevant information from net. I have set it up as Dial up network and while trying to connect with user id and password , I am getting Error 676: The other computer did not respond. Help needed in this regard. TIA.
Verified answer
don't worry
don,t make internet connection
its automatic modem its ruining on local aria connection
connect ur pc via modem Cable First
open internet explorer type in address bar configure ration ip 192.168.1.1 press inter
user name type "admin" password type "admin" press inter
Select Second option advance setup /Wide Area Network (WAN) Setup delete ext era Con. ID only get one on top-one edit
VPI: [0-255]
VCI: [32-65535]
Enable VLAN Tagging
802.1Q VLAN ID: [0-4095]
next
PPP over Ethernet (PPPoE) check this one and next
PPP Username: ****
PPP Password: *****
PPPoE Service Name:
Authentication Method AUTO
NEXT
Enable WAN Service check this one
Service Name pppoe_0_35
NEXT
SAVE
ANS SAVEAND REBOOT
now ur modem automatically getting ip and configuration
after three minute u can use internet
for wireless in-able wire less from this congregation
i hope u get best result
reset router & reconfigure router on pppoe mode.& also configure ip on obtain mode.